some notes.

stm32loader/README

@@ -0,0 +1,29 @@
+STM32Loader
+===========
+
+Python script which will talk to the STM32 bootloader to upload and download firmware.
+
+Original Version by: Ivan A-R <ivan@tuxotronic.org>
+
+
+Usage: ./stm32loader.py [-hqVewvr] [-l length] [-p port] [-b baud] [-a addr] [file.bin]
+    -h          This help
+    -q          Quiet
+    -V          Verbose
+    -e          Erase
+    -w          Write
+    -v          Verify
+    -r          Read
+    -l length   Length of read
+    -p port     Serial port (default: /dev/tty.usbserial-ftCYPMYJ)
+    -b baud     Baud speed (default: 115200)
+    -a addr     Target address
+
+    ./stm32loader.py -e -w -v example/main.bin
+
+
+Example:
+stm32loader.py -e -w -v somefile.bin
+
+This will pre-erase flash, write somefile.bin to the flash on the device, and then perform a verification after writing is finished.
+