From d7ac476ca054cdf191c783453bd8321e3318a057 Mon Sep 17 00:00:00 2001 From: tommy-b-10 Date: Sat, 16 Sep 2017 14:42:27 +0930 Subject: [PATCH] Updated for SidePilot --- documentation/install_post.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/documentation/install_post.md b/documentation/install_post.md index 5fae3ed..c6e7538 100644 --- a/documentation/install_post.md +++ b/documentation/install_post.md @@ -1,14 +1,14 @@ ## Open Solo - Post Installation Instructions ## Regardless of installation method, this is what you will need to do next, leading up to flight. -1. **Level Calibration:** Use the _IMU Calibration_ function in the Solex app, or the _level calibration_ function in the 3DR app, or the _3D Accel Calibration_ in Mission Planner, or the _Accellerometer Calibration_ in the Tower app to do the level calibration. They all do the same thing and just give it different names. Reboot when complete. +1. **Level Calibration:** Use the _IMU Calibration_ function in the Solex app, or the _level calibration_ function in the 3DR or SidePilot apps, or the _3D Accel Calibration_ in Mission Planner, or the _Accelerometer Calibration_ in the Tower app to do the level calibration. They all do the same thing and just give it different names. Reboot when complete. - The level calibration must be done on a solid, stable, level surface like a table or hard floor. - For each axis you calibrate, wait about 5 seconds after putting it down before pressing the button. - Make sure the solo is perfectly still when you push the button each time. - The first step where it is right side up needs to be both perfectly still and as level as you can make it. The rest do not require perfect leveling. - Reboot when complete. The apps may not tell you to reboot. They may tell you to go fly. Trust me. Reboot. -2. **Compass Calibration:** Use the _Compass Calibration_ function in The Solex app, or 3DR app. Or use the _Onboard Compass Calibration_ in Mission Planner. They all do the same thing and just give it different names. Reboot when complete. +2. **Compass Calibration:** Use the _Compass Calibration_ function in The Solex app, SidePilot or 3DR app. Or use the _Onboard Compass Calibration_ in Mission Planner. They all do the same thing and just give it different names. Reboot when complete. - Must be done outdoors - Must be done in an open area away from buildings, vehicles, reinforced concrete slabs, power lines, MRI machines, metal fencing, etc. - Remove any magnetic jewelry or steel accessories you may be wearing